For the LandCruiser 300 Series
A purpose-built Starlink Mini mounting system.
No roof rack required.
A low-profile billet platform made specifically for the LandCruiser 300 Series. Available in plain billet or colour-matched to your vehicle, with or without a Gorilla Mount Starlink Mini Mount.
- LC300 2020+Purpose-built for the 300 Series
- No roof rackLow-profile bonded plate
- 3M VHB 4991Bonded roof plate
- Plain or colour-matchedFinish options
Built for the roof that rules out a magnet
The 300 Series has an aluminium roof, so a magnetic base cannot hold. This shaped billet platform follows the 300 Series roofline and creates a dedicated mounting point for a Gorilla Mount Starlink Mini Mount without requiring a full roof rack.
The platform bonds to the aluminium roof using a pre-cut 3M VHB 4991 pad.
- Colour-matched to your vehicle, or plain billet
- Shaped to the 300 Series roofline
- Low profile, with no full roof rack
- Designed specifically for a Gorilla Mount Starlink Mini Mount
Watch the video
No roof rack. No drilling. Built for the 300 Series.
See the purpose-built LC300 roof system and Gorilla Mount Starlink Mini setup in action.
A complete, bonded system
A bundled LC300 roof-mount and power setup, available with or without a Gorilla Mount Starlink Mini Mount.
-
Prep
Clean the bonding surfaces with a 50:50 isopropyl alcohol and water solution using a lint-free cloth, then position the plate using the engraved orientation arrow.
-
Bond
Bond the plate with the pre-cut 3M VHB 4991 pad, applying approximately 100 kPa / 15 psi of uniform pressure. Do not reposition it after pressure is applied or load the system until the adhesive has fully cured.
-
Route
Two billet cable routers guide the power cable cleanly along the roofline.
-
Power
The custom plug-and-play 12V-to-48V Anderson power adapter and Cowfish remote switch run your Starlink Mini.
What's in the kit
The LC300 roof-mount and power components supplied with each option.
- 300 Basemount billet aluminium roof plate
- Pre-cut VHB pad for the main plate
- Two billet cable routers with mounting pads
- 3 m power cable
- Cowfish remote switch with remotes
- Custom plug-and-play 12V-to-48V Anderson power adapter with fused wiring
- Optional Gorilla Mount Starlink Mini Mount in your chosen mount colour when selected
Product specifications
- Material
- 6061 billet aluminium
- Plate size
- 260 x 300 x 20mm
- Plate weight
- Approx 1.15kg
- Mounting
- Four tapped M8
- Adhesive
- 3M VHB 4991, 2.3mm
- Cable routers
- Two billet, 4.5mm channel
- Rated load
- 9kg
- Temperature rating
- Up to 120°C
- Fitment
- LC300, 2020 onwards
Finishes
Plain billet, or matched to your 300 Series.
Machined billet
The raw, machined billet finish without vehicle colour matching.
OEM colour-matched
Matched to your vehicle's factory colour so the platform sits back into the roofline. Choose your colour below.
OEM colour-matched
Matched to your vehicle's factory colour so the platform sits back into the roofline. Choose your colour below.
Your colour is selected on the product page. Gorilla Mounts is an independent Australian brand and is not affiliated with or endorsed by Toyota.
Configure your 300 Basemount
Configure the kit and view live pricing on the product page.
Choose a kit with or without a Gorilla Mount, in plain billet or a vehicle colour-matched finish, on the product page. Please allow 7 days for dispatch. Australia only; shipping is calculated at checkout.
Pre-order nowQuestions
Will it fit my 300 Series?
The platform is made for the LandCruiser 300 Series, 2020 onwards.
Can I buy it without a Gorilla Mount?
Yes. Choose the kit without a Gorilla Mount if you already own one. It includes the same LC300 roof plate, VHB components, cable routers and power components, without the mount.
How do I choose my colour?
Pick plain billet, or match the paint code on your vehicle's VIN plate to the code shown in the Roof Plate Finish selector. You do not need to submit your VIN.
How is it installed?
Supplied as a DIY installation kit. Follow the supplied instructions for DIY installation, or have the kit fitted by a professional. The plate bonds to the roof with 3M VHB 4991, with no drilling. Follow the specified surface-preparation, pressure and curing requirements, and do not load the system until the adhesive has fully cured. Professional removal is highly recommended.
When will it ship?
Please allow 7 days for dispatch. Australia only; shipping is calculated at checkout.
Is it covered by warranty?
The product is covered by Gorilla Mounts' 12-month product warranty, subject to its terms and exclusions. Damage caused by incorrect installation or removal is not covered. For warranty questions or claims, contact sales@gorillamounts.com.au or 07 3059 9529.
Can I cancel my order?
Yes. Contact Gorilla Mounts if you need to cancel; cancelled orders will be refunded.
Purpose-built.
Made for the LC300.
Yours to pre-order.
Pre-order now
Not ready to pre-order? Get updates for the 300 Series and beyond, here.
No spam. Unsubscribe at any time. Privacy policy.
Vehicles shown are for illustration. Starlink Mini hardware is not included. Gorilla Mounts is an independent Australian brand and is not affiliated with or endorsed by Toyota.